Alkali-resistant fibreglass mesh for reinforcing interior and exterior levelling compounds. Alkali-resistant Fibreglass Mesh 4x4.5 mm, 1,000 mm long for insertion as reinforcing in the first layer of Mapegum WP, Aquaflex (specially for asbestos), Mapelastic, Adesilex FIS13, Plastisol 1 and bituminous type products to prevent the formation of cracks caused by tensions generated in the substrate. Packaging rolls of 50 m.


Ready-to-use heavy-duty waterproofing cementitious mortar. Use Idrosilex Pronto to waterproof foundations, walls, cellars, basements, lift-rooms, swimming-pools, canals and reservoirs. Formulated from cement binders and special waterproofing additives, Idrosilex Pronto is prepared by mixing a 25 kg bag with 6-6.25 litres of clean water. Idrosilex Pronto can be applied with a brush, trowel or spray. For application by brush or spray, apply 2-3 coats to the perfectly cleaned and solid substrate which must be thoroughly soaked with water beforehand. When applying by trowel reduce the mixing water to 5-6 litres for each bag. Consumption 1.6 kg per mm of thickness. Packaging 25 kg bags (grey and white).


Epoxy paint for acid-resistant non-toxic coating of concrete surfaces. Mapecoat I24 is used to coat concrete surfaces designed for contact with food products in wine, oil, confectionery industries, etc. Mapecoat I24 is especially recommended for coating reservoirs built to contain drinking water. Mapecoat I24 is a two-component epoxy paint. Prior to use, the components must be thoroughly mixed until complete homogeneity is obtained. Characterized by a low viscosity, Mapecoat I24 can be applied easily on perfectly clean, solid and dry substrates by brush, roller or spray. After the completion of the cross-linking, Mapecoat I24 forms a non-toxic protective coating that is waterproof and vapourproof. Consumption 400-600 g/m2 per coat depending on the type of substrate. Packaging 5 kg (A B)